SUNTEC KML-8403 design Instrucciones De Uso página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
Components
1: Lid
2: Rotating blade
3: Lid lock
4: Bowl
5: Safety mechanism
Operation
Operating voltage: Stromversorgung: 220-240V~, 50/60Hz, 200W
Please remove all packaging material and check the appliance for visible damages. Do not use the
appliance when there are damages and please contact your seller.
Clean the appliance prior to first use and follow the instructions from the segment "Cleaning".
Turn the lid anti-clockwise to open and lift it up. Please fill the coffee beans into the bowl. The max.
capacity of the appliance is 60g. 1Tbs is suitable for a cup of coffee. This may vary depending on the
individual taste. Please do not overfill the bowl.
When the coffee beans are inside the bowl, put the lid back onto the appliance and turn the lid
clockwise until the stop. The integrated safety mechanism stops the appliance from turning on when
the lid is not fully closed.
Please connect the appliance to the power outlet. To start grinding, press and hold the on-/off-button
until you are content with the grinding result. Please be aware that the appliance should not be
operated longer than 1 minute to avoid overheating of the motor. Let the appliance cool down for at
least 10 minutes before grinding again.
When you are done with grinding, please disconnect the appliance from the power outlet. Turn the lid
anti-clockwise and lift it up. You can now use your grinded coffee.
6: Body
7: Motor
8: Bottom panel
9: Cord storage reel
10: Screws
11: Rubber feet
12: Integrated switch
13: Spring
14: On-/Off-button
15: Power cord

Publicidad

Tabla de contenido
loading

Tabla de contenido