Storage; Maintenance; Cleaning; Disposal - Powerfix Profi PRW 2 A1 Instrucciones De Uso

Storage

♦ Store the product as a stool. Lay the product on its side on the frame so it cannot
tip over or roll away. Select a clean, dry place away from direct sunlight.

Maintenance

♦ Check that all the screw connections are sufficiently tightened at regular intervals.
♦ Tighten the product's screw connections if necessary.
♦ Any damaged screw joints should be replaced by a specialist.

Cleaning

CAUTION
► Do not use aggressive or abrasive cleaning agents, as these can damage the
outer surfaces of the product.
♦ Clean the product using a moistened cloth and a standard commercial house-
hold detergent.

Disposal

Disposal of the product

Dispose of the product via an approved waste disposal company or your
municipal waste disposal facility. Observe the currently applicable regulations.
Please contact your waste disposal facility if you are in any doubt.
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product.

Disposal of packaging

Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites.
PRW 2 A1
GB │ MT │
31 ■