Kicker KEYLOC Manual Del Propietário página 24

KEYLOC frozen or stuck in operating procedure? ΠCycle the power
 Reset the remote Ž Reset the KEYLOC
Alternator noise-whining sound with engine's RPM? ΠCheck
for damaged RCA (or speaker input) cable  Check the routing of RCA
(or speaker input) cable Ž Check the source unit for proper grounding
 Check the gain settings and turn them down if they are set too high.
CAUTION: When jump starting the vehicle, be sure that connections
made with jumper cables are correct. Improper connections can result in
blown fuses as well as the failure of other critical systems in the vehicle.
If you have more questions about the installation or operation of your new
KICKER product, see the Authorized KICKER Dealer where you made your
purchase. For more advice on installation, click on the SUPPORT tab on
the KICKER homepage, www.KICKER.com. Choose the TECHNICAL
SUPPORT tab, choose the subject you are interested in, and then
download or view the corresponding information. Please E-mail support@
KICKER.com or call Technical Services (405) 624-8583 for unanswered or
specific questions.
English 23