9. Abnormalities indications on the display
If the TL-6e identifies any abnormality causing the measurements to be
excessively inaccurate or not possible at all, a warning message will be
shown on the display, allowing the operator to identify and correct the
problem.
9.1. Excessively high spurious voltages
If parasitic currents present in the soil are > 7 V and are seriously
affecting the equipment precision, the display will show the following
message:
9.2. Excessively high earth resistance
If the system's resistance is exceptionally high (above 20.00 kΩ), and
therefore beyond the equipment range, the following message will appear
(upper line):
51