WORK SHEET / NOTES FEUILLE DE TRAVAIL/NOTES HOJA INFORMATIVA / NOTAS SKU # QTY. Keep in mind, when figuring hardware quantities, that hardware comes 4 pcs. COMPONENTS per bag, with the exception of PANEL COMPOSANTE • COMPONENTES CAPS at 16 per bag. AH __________ ____ NOTE: Sample configurations are on pag-...
TABLE OF CONTENTS TABLE DES MATIÈRES ÍNDICE Components ............2 Composante Componentes Hardware ............3 Matériaux Herramientas Basics of Assembly.......... 4 - 8 Les bases de l’assemblage Datos básicos de armado Design Tips ............9 Conseils de conception Consejos de diseño Sample Configurations ........
COMPONENTS COMPOSANTES • COMPONENTES Choose from either Standard or Heavy-duty Choisissez RÉGULIERS ou TRÈS RÉSISTANTS Elija entre ESTÁNDAR o REFORZADOS PANELS • PANNEAUX • PANELES 30in. x 60in. • 76,2 x 152,4cm / 30in. x 30in. • 76,2 x 76,2cm AH 33030 AH 36030 AH 43030 -...
HARDWARE MATÉRIAUX • HERRAMIENTAS AH 30022 AH 32020 Panel Connector Cap Clamp Capuchon De Connecteur Attache De Panneau Abrazadera Tope De Conexión De Panel Use to attach a panel to a gable, extra security when stacking panels, attaching gap filler to panel Recommend 1 bag for each panel or gable...
BASICS OF ASSEMBLY LES BASES DE L’ASSEMBLAGE DATOS BÁSICOS DE ARMADO VERTICAL WALL PANELS (fig. 1) Only PANEL CONNECTOR CAPS (AH 30000) are needed for basic assembly to hold panels together on the top and bottom (fig. 1) They also work at a 90 o angle/corner.
Página 7
BASICS OF ASSEMBLY LES BASES DE L’ASSEMBLAGE DATOS BÁSICOS DE ARMADO Back Panel (fig. 7) FLAT ROOF or FLOOR PANEL ATTACHMENT Panneau arrière Panel posterior When attaching a panel to create a flat roof or floor, the roof or floor panel will fit on the INSIDE of the side panels, FLUSH with OVERHEAD VIEW the front and back panels, and will attach...
Página 10
BASICS OF ASSEMBLY LES BASES DE L’ASSEMBLAGE DATOS BÁSICOS DE ARMADO (fig. 4) GABLED ROOF ASSEMBLY When attaching GABLE (AH 36010 or AH 46010) to create a pitched roofline, CLAMPS (AH 32020) to secure Gable to 60in. long top edge. (fig. 4) ASSEMBLAGE DU TOIT À...
ASSEMBLY & DESIGN TIPS ASSEMBLAGE ET CONSEILS DE CONCEPTION CONSEJOS DE ARMADO Y DISEÑOS MULTI-TIERED SET-UP (fig. 8) (fig. 8) When stacking panels vertically you can use a 2-WAY or 4-WAY CONNECTOR to secure panels. For horizontal stacking use a CLAMP (AH32020) to secure panels.
SPECIAL ORDER OPTIONAL ACCESSORIES COMMANDE SPÉCIALE D’ A CCESSOIRES OPTIONNELS ACCESORIOS OPCIONALES CON PEDIDO ESPECIAL AH 31212 AH 32414 24 INCH HIGH RISER SHELF CORNER SUPPORT STRUCTURES À PATTES SUPPORT POUR ÉTAGÈRE ESTRUCTURA CON PATAS SOPORTE PARA ESTANTE Use with 30in. or 60in. panels to create a shelf.
HD PANELS ASSEMBLY TIPS CONSEILS D’ A SSEMBLAGE DE PANNEAUX HD CONSEJO PARA ARMADO DE PANELES HD FLAT ROOF or FLOOR PANEL ATTACHMENT (fig. 1) Bottom Left Corner View When attaching a PANEL to create a flat roof or floor, the roof or floor panel will fit on the INSIDE FRONT PANEL of the side panels, and flush with the front and SIDE PANEL...
LIMITED EXPRESS WARRANTY Jewett-Cameron Company warrants your product to be free of defects in workmanship and further war- rants that under normal use will be free of problems for one full year from date of purchase by original purchaser. JEWETT-CAMERON COMPANY WILL NOT HAVE OTHER OR GREATER LIABILITY FOR DEFECTS, NOR WILL JEWETT-CAMERON COMPANY HAVE ANY LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.