Young America BTK-3230 Instrucciones De Ensamble página 10

Step 5: (The final and most important) Checklist.
Inspect the bed once again to assure that all bolts are tight and that no hardware is missing. (if you

are missing hardware, contact Stanley Furniture immediately for replacement and do not use the
bed until the new hardware arrives).
Do not place the bed near a window where the child may have access to window coverings, cords

or draperies as these articles pose a strangulation hazard.
Replace the instructions in the holder provided. KEEP THE INSTRUCTIONS WITH THE BED.

Install the crib mattress.

Follow all the warnings on the use of this bed and all products in the bed.

CAUTION: Any mattress used in this bed must be at least 27-1/4" by 51-5/8" with a thickness of

no less than 4 inches and not exceeding 6 inches.
Conversion from Toddler Bed to Daybed.
Your Built to Grow Toddler Bed can be converted to
a Daybed by removing the Toddler Safety Rail from
the Toddler Bed/Daybed Conversion Kit. Refer to
pages 7 and 8 of this instruction booklet.
Safety Rails for a Full Size Bed item PSR-3268 are
available for added safety when the bed is converted
to a full size bed. Contact your youngAmerica dealer
to purchase this item.
Conversion to a Full Size (4/6) Bed items
RLS-0050 and SLR-0468 are available and instruc-
tions to convert the Built to Grow crib are on page
15 of the Crib Instructions Booklet. Contact your
youngAmerica dealer to purchase these items.
Final Step
10