Publicidad
Idiomas disponibles
Idiomas disponibles
English
General safety requirements
`
`
Read these directions for use carefully before using.
`
`
Keep these directions for use where they will be
accessible for all users.
`
`
Failure to comply with the directions for use shall
render all warranty conditions null and void and
may lead to personal injury and material damage.
`
`
The instrument must only be used by qualified
skilled employees.
Safety instructions before using
`
`
Follow the manufacturer's instructions and safety
instructions of the medium you are sampling.
`
`
Do not fill the instrument with potentially explosive
substances.
`
`
The instrument must only be used within the
confines of applicable material resistance and for its
designated purpose. Any other type of use will affect
the warranty/guarantee.
`
`
When sampling hazardous substances, follow
the technical rules on hazardous substances (in
accordance with TRGS – (German) Technical Rules
on Hazardous Substances) and wear appropriate
protective equipment.
WARNING!
Damage to the respiratory tract and other organs
due to escaping media.
`
`
When sampling hazardous substances, follow
the safety data sheet of the medium to be
sampled.
`
`
Wear the appropriate protective clothing.
NOTE!
Before using, the instrument has to be cleaned to
the extent of your (validated) cleaning process.
`
`
Measures of manual cleaning have to be carried
out in the cleaning/desinfection area and under
consideration of occupational health and safety.
`
`
Pay attention to the material resistance.
Layout and function
The instrument is used for removing bulk goods from
silos. It is made of aluminium and stainless steel. The
instrument is maintenance-free and suitable for steam
sterilisation (bis 121°C).
Parts in contact with medium
`
`
Aluminium
`
`
Stainless steel 1.4301/AISI 304
Point out any damage in the packaging to the freight
forwarder/supplier immediately.
Assembly
CAUTION!
Openings with sharp edges on the instrument.
Danger of cutting.
`
`
Keep hands well away from openings with sharp
edges.
1. Attach the handle onto the rod .
2. Attach the collection cylinder onto the rod and fix
it with the safety clamp .
Safe sampling
1. Drill the instrument with the aid of the handle
clockwise to the desired depth into the medium to
be sampled (sampling chamber is closed).
NOTE!
The instrument is designed for manual operation.
`
`
Do not hammer the instrument into the con-
tainer by using a hammer.
2. At the desired depth, turn the instrument counter
clockwise (sampling chamber opens).
3. After approx. 5 rotations, the sampling chamber is
filled.
4. Turn the instrument clockwise for approx. 2 rota-
tions (sampling chamber closes).
5. Pull the instrument out of the medium to be
sampled with the aid of the handle.
Publicidad
