Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Amate Electroacústica, s.l appreciates
your reliance on this product and thanks
you for purchasing it. We hope it will
satisfy you in all aspects. If you are already
acquainted with Master Audio products,
then you know for sure that all our items
have successfully gone through various
stages of Quality Control that Certify their
maximum
trustworthiness
even
extreme working conditions.
Nevertheless, we recommend you to
carefully read this Instruction Manual in
order to get familiar with all the details
regarding the operation and maintenance of
the equipment. If there should be any
circumstance not included in this Manual,
do not hesitate to contact your dealer.
TABLE OF CONTENTS
1-GENERAL FEATURES
- Connections
- Inputs
- Outputs
2-CONTROLS AND FUNCTIONS
- Input section
- Control and Output Section
3- SOURCE CONNECTION (Inputs)
4- OUTPUT CONNECTION
-Output from the Mixer with a Female
XLR-3 connector.
5- CONNECTION TO THE MAINS
SUPPLY
6- MAINTENANCE
7- WARRANTY
8- TECHNICAL FEATURES
7
1-GENERAL FEATURES
The DJ842 and M1262 are multi-source
sound mixers.
Due
to
its
concept,
recommended for use in Discos or PA
events, they allow the complete processing
under
of
any
signal
source
conventional turntables, from reproduction
units for Cassette tapes, CDS, Video-TV,
Tuners or electronic musical instruments,
and from balanced Microphones. They are
also perfectly suitable for small Audio
production studios operated by Video
amateurs,
as
well
as
productions at home.
The
structure
is
divided
complete, functional sections: INPUTS,
OUTPUTS and CONTROLS.
At the INPUT section there are various
options for each channel:
a) MIC/LINE, with their corresponding
selection switch.
b) A double-function option combining the
Input for Line-reproducing devices (LINE)
with
the
Input
for
Turntables(PH) or CD (CD)
This double selection function is selected
through a button for that purpose located in
the first function-selection range. Each
channel also includes an input level control
(GAIN). It allows an accurate adjustment
of the sensitivity of the incoming signal
(CD, Phono, Cassette, Micro, Instrument,
etc.) for their correct treatment further on
(Equalizing, Monitoring and Mix).
They also include 3 TONE Controls for the
equalizing of High (HIGH), Mid (MID)
and Low (LOW) frequencies with an
adjustment margin of +12/-26 dB per band.
especially
The PFL, which (by just pressing it) sends
the Post-EQ signal to the Headphones
output.
coming
from
A 5-Led Bar indicates the presence of input
signal in each channel.
Finally, a 45mm FADER of superb quality
allows an efficient and safe contact with the
tracks, avoiding the risk of breakage due to
for
musical
accidental blows.
Regarding the OUTPUTS there are various
into
three
possibilities:
a) A general (BALANCED OUT) option,
electronically balanced by using integrated
components of excellent quality and
provided with XLR-3 connectors, with a
level control (45mm Stereo Fader IN
M1262), a Mono switch (M1262), a
Balance adjust (L/R) and a VU-meter that
includes 20 Led indicators.
b) Another option Stereo (with RCA
conventional
connectors), parallel to the main output and
provided with its own Level control.
c) Output Level 2 (with RCA) and level
control (only in M1262)
d) Auxiliary output , with its own Level
Control.
e) One output for REC, which may be used
8
independently for various functions.
f) HEADPHONES: Headphone Output for
the Control of the Program or of the PFL
through PFL-PGM switch.
Finally, a quick Mix CROSSFADER unit is
also available. It has its own circuit offering
superb
mixing
quality,
efficient
comfortable determination of the channels
to be mixed and, in case of fault or wear, a
quick exchange option that does not require
the system to be turned off.
A switch connects the power from the
general mains supply (230V).
Connections
All connections are located on the rear part
of the equipment for a clean, safe
installation, protected against blows, dust
and moisture.
Inputs
XLR-3 (Bal) for MICRO and RCA (red /
white) for Line / Phono / Cd.
Outputs
XLR-3 (Bal) for OUTPUT (Left & Right).
RCA (Red / white) for MASTER/LEVEL 1
/ LEVEL2 / AUX / REC. Jack ¼" Stereo
for HEADPHONES.
and
Publicidad
