Maxon 296665-01 Manual De Instrucciones página 5

REVERSING TIRE RACK OPERATION
NOTE: Tire racks are set at the factory to unfold toward the LH side of the platform and
lock in the folded position when platform is stowed. If the position of the tire rack
is reversed, the tire rack will not lock when the platform is stowed. Do the follow-
ing steps to reposition the stop blocks. This allows tire rack to lock when re-
versed to RH side and platform is stowed.
1. Unbolt the stop blocks from both sides of tire rack
(FIG. 5-1).
STOP BLOCK
LOCK NUT, 3/8"-16
(2 PLACES)
STOP BLOCK
TIRE RACK
(OUTBOARD SIDE)
LIFT CORPORATION Sht. 5 of 32 DSG#
TIRE RACK
(INBOARD SIDE)
SCREW, HEX CAP,
3/8"-16 X 1" LG.
LOCK NUT, 3/8"-16
(2 PLACES)
(2 PLACES)
(LH MOUNTED TIRE RACK SHOWN)
M-15-26
Rev. A Date: 10/30/18
SCREW, HEX CAP,
3/8"-16 X 1" LG.
(2 PLACES)
UNBOLTING STOP BLOCKS
FIG. 5-1