Playing Music Via Usb; Description Of The Control Buttons - Bigben CD61USB Manual De Instrucciones

NOTE:
• if a disc is inserted the wrong way around, respectively if no disc is inserted, then the message "NO
" appears in the display.
• Playback of CDs produced by the user cannot be guaranteed due to the large variety of software
and CD media available.

Playing music via USB

This device has been developed in line with the latest technical advances in the USB field. The wide
range of different USB storage devices of all types which are currently on the market, unfortunately do
not allow us to guarantee full compatibility with all USB storage devices. For this reason, in rare cases
there may be problems in playing back files from USB storage devices. This is not a malfunction of
the device.
1. Select the USB mode with the "STANDBY / FUNCTION" button.
2. Connect a USB storage device directly into the port. The display briefly shows the number of
folders and then the total number of tracks. Playback will automatically start after a few seconds.
For operation, please refer to the section "Description of the control buttons".
NOTE:
• Always directly connect a USB storage medium to the USB port to prevent any malfunctions.
• The USB port is not designed for charging external devices.
CAUTION:
• Switch the device to a different operating mode before you remove the USB storage device

Description of the control buttons

NOTE:
• Not all the functions may be supported depending on the playback device.
PLAY / PAUSE
• You can briefly interrupt and resume playback using this button. The display shows the elapsed
playback time flashing. Pressing again continues playback.
• Press and hold this button during operation to briefly display the current time.
SKIP+ & SKIP-
• With "SKIP+ / TUNING+" button you can jump to the next or previous track etc.
• If the button is kept pressed down, the machine starts to search through the tracks.
The "SKIP- / TUNING-" button can be used as follows:
• Press once = This starts the current track again from the beginning.
• Press twice = This jumps back to the previous track.
STOP
• The playback is stopped.
MODE
• In stop mode for programming any order of tracks (see the section on "Programmed Play").
During the playback of an audio CD:
• Press once = the current track is repeated continuously. The symbol "REP" appears in the display.
• Press twice = the whole CD is played continuously. The symbol "REP ALL" appears in the display.
• Press three times = all tracks will be played in random order. The symbol "RAND" appears in the
display. Press four times = all functions are cancelled. The normal play mode is resumed.
During playback of MP3 music:
• Press once = the current track is repeated continuously. The symbol "REP" appears in the display.
• Press twice = the selected folder is repeated continuously. The symbol "REP ALBUM" appears in
the display.
• Press three times = all music titles are repeated continuously. The symbol "REP ALL" appears in
the display.
- EN 7 -