Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
SPECIFICATIONS
Model
Loudspeaker
Rated Power (RMS)
Power Taps
Impedance
Sensitivity SPL (1 W / 1 m)
Sound Pressure SPL (60 W / 1 m)
Freq. Range
Cutout Size
Dimension (mm)
Weight
Finish
Colour
Mounting
Power selection
INSTALLATION GUIDE
- Cutout the hole size, either by tracing the cardboard cutout template or with a circular cutter set to
the cutout size.
- Pull the wiring through the cutout hole and connect it to the rear panel of the speaker. Use the
"LOOP" connection
(LOOP +, IN +, IN-, LOOP-),
- Insert the speaker into the ceiling as far as it goes, until the front baffle rim touches the ceiling.
- Turn the attachment screws CLOCKWISE to tighten the mounting tabs. The first ¼ clockwise turn
rotates the attachment tabs outward and the remaining turns tighten the tabs down onto the back
of the ceiling surface. DO NOT OVERTIGHTEN.
- Using a screwdriver set the power tap in the rotary switch placed next to the speaker unit.
- Fix speaker's grille. Fixing is carried out with the magnets, no tools are required.
A-258MHQ Version 1.0
to connect speakers in parallel.
1/1
CEILING SPEAKER
WARNING:
Installation by qualified personnel only.
Speakers must be wired in parallel and connected to
the correct line terminals of amplifier.
Ensure that all speakers have the same polarity with
respect to each other.
Do not select another tapings if the speaker is in use.
No naked flame sources, such as lighted candles,
should be placed on the apparatus
A-258MHQ
8" woofer + 1" tweeter
60 W (100 V), 75 W (8 Ω)
60 W, 30 W, 15 W, 7.5 W & 3.75 W
166 Ω, 333 Ω, 666 Ω, 1333 Ω, 2666 Ω & 8 Ω
92 dB
110 dB
55 ~ 20000 Hz
Ø 292 mm
Ø 320 x 245 (depth)
5.2 kg
ABS, metallic grille
White (RAL9016)
Rotary tabs
Rotary switch
A-258MHQ
.
Publicidad
