Product Specifications - Auto-T 540326 Manual Del Usario

Consumers are obliged by law to return electrical and electronic devices at
the end of their service lives to the public collection pointes that are set up
for this purpose or designated points of sale. However, such details are
defined by the national law of the respective country.
This symbol on the product, the instruction manual or the packaging
indicates that the product is subject to these regulations. By recycling,
reusing the materials, or other forms of utilizing old devices, you are making
an important contribution in protecting our environment.
Thank you for purchasing the new power bank
fashionable design, convenient carry, high capacity and fast charging, this
product can quickly meet charging demand of communicate digital devices
like mobiles,iPhone,iPod,MP3,GPS,etc.
Safety information
Before installing and using this product, please read the instructions
thoroughly and retain them for future reference. lmproper use of this
product may result in product damage, excess heat, taxie fumes, fire or
explosions.
1. Read the instructions carefully before using.
2. Do no! open or use force in a defective condition.
3. The unit must only be used in confined spaces.
4. Protect from rain and moisture.
5. Keep away from children.
6. Disconnect the device from the power source after charging.
7. Do no! expose the product to direct sunlight, fire or other sources
or heat that has an extreme effect on the temperature.
8. Do not intend to open or disassemble the product. Such action will void
the warranty.
CAUTION
When charging this product by using the USB charging cable, always hold
the charging plug to plug in and out. If you pull the cable instead of the
charging plug, the USB charging cable might gel damaged and there is a
risk of short-circuiting or electric shocks.

1. PRODUCT SPECIFICATIONS

Input voltage DC SV
Input current 1000mAh
Output voltage DC SV
Output current 1 OOOmAh/21 OOmAh
Capacity 6000mAh
Product weight 160g
Product dimension 105(L)*63 (W) *23(H)mm
Operating temperature -1 O"C-60"C
Storage temperature -10"C-45"C
HOW TO CHARGE THE POWER BANK
HOW TO USE
1. Simply using the attached USB cable to connect with the "OUT" port of
the power bank.
2. Using the other end of the USB cable to charge the digital product,
it starts charging.
3. When the power bank without output, il means you have to charge the
power bank immediately.
NOTE:
1. Because of the power conversion efficiency of the power bank and your
digital devices, the rated capacity of the power bank is not equal to the
actual chargeable capacity.
2. This power bank cou Id charge the most of the digital devices, but there
is still the chance that maybe some kind normal area and cannot be
regarded as the defects.
3. If the power bank cou Id no! charge your devices, then check if the cable
is firmly connected or if the right connector has been chosen, the original
cable sold along with your device is always suggested to use.
. With
Auto-T