Tabla de contenido
Publicidad
MOBIC T8 in areas susceptible to electromagnetic interference
Procedure
1. Switch on the MOBIC T8.
2. Select "Start ► Settings ► Control Panel ► Regional and
Language Options".
3. Open WLAGS641.
The dialog "Siemens Wireless Network Driver" opens.
4. Select the "IP Address" tab.
5. Select the "Disabled" checkbox.
6. Press OK.
The icon
7. Close the open window.
Result
The CP 1515 is disabled. The icon WLAGS641 is identified
with a red "x" in the window "Network Connections".
Installing the CP 1515
Procedure
1. Insert the CP 1515 in the internal slot.
2. Protect the CP 1515 with the terminal block.
The terminal block prevents the CP 1515 from slipping
out of the slot during rough usage conditions.
Enhancement of the WLAN range
The range of the WLAN can be enhanced if you place the
Wireless LAN PCMCIA card CP 1515 on the front side of the
device under the protective cover instead of in the battery
compartment. In this case, protection rating IP65 is not
guaranteed.
MOBIC T8
Product information, 08/2006, A5E00882110-01
no longer appears in the status area.
1-3
Publicidad
Tabla de contenido
