Tiiwee A2 Manual De Instrucciones

ENGLISH
Tiiwee A2 PIR Motion Sensor Alarm
Compatible with Tiiwee Home Alarm Sensors
IMPORTANT: Please also refer to www.tiiwee.com for further information and technical assistance. We are
improving our site continuously to make sure you have the best possible experience with our products. We
normally respond within 24hours to any questions.
Introduction
Congratulations with your Tiiwee PIR A2 Motion Sensor Alarm. The PIR motion sensor alarm is intended to
detect when people enter your shop or your home. Depending on your need, it will sound a loud siren alarm or
a friendly chime. The PIR motion Sensor features fuzzy logic processing technology and intelligent analysis
algorithms to optimize its ability to correctly interpret signals.
The PIR motion sensor alarm can be operated directly on the device or with a remote control. If required, you
can link multiple remote controls form the Tiiwee Home Alarm System to allow your team- or family members
to arm or disarm the PIR motion sensor alarm as well. An innovative feature is the ability to add sensors from
the Tiiwee Home Alarm System easily to extend your PIR Motion Sensor Alarm capabilities. It can be linked to
other components of the Tiiwee Home Alarm System like the Door & Window sensor or the PIR sensor.
Box contents
1 x A2 PIR motion sensor alarm
1 x remote control
3 x batteries 1.5V AAA, alkaline
Flexible mount
Pair of screws
Instructions for use
Product Overview
A2 PIR Motion Sensor Alarm
A. Siren
B. Detection window
【
C. Mode button
D. On/Off button [
【
E. Pairing button
Remote Control
F. Disarm: deactivate the Alarm Unit
G. Arm button: activate the Alarm Unit
H. Switch Voice: Switch from Chime to Siren and vice versa
I. Bell button: triggers a loud emergency alarm
】
]
】