Inficon GAS-Mate Guia De Inicio Rapido página 4

c. If needed, adjust sensitivity by swiping up or down on the
touch pad. The leak indicators will illuminate to indicate the
sensitivity level.
NOTE:
GAS-Mate defaults to maximum sensitivity on
startup. It is recommended to use this setting for
most applications.
3. Using GAS-Mate to Detect Leaks
a. Once warm-up is complete, enter the test area.
b. Place the tip of GAS-Mate as close as possible to the
suspected leak.
c. Slowly move the probe past each possible leak point. If a
leak is detected, GAS-Mate will alarm and the leak indicators
will illuminate. Faster beeping or a solid alarm indicate a
larger concentration of combustible gas.
WARNING!:
d. When a leak is identified, pull the probe away from the leak
for a few seconds and then return it to pinpoint the leak.
Download the full operating manual from
GAS-Mate automatically zeros the
background level of combustible gas, so a
lack of alarm may not indicate a safe
environment.
www.inficonservicetools.com
www.inficonservicetools-europe.com
4