KTM FLEX 7870293104404 Guia De Inicio Rapido página 4

4
Scope of delivery pre-assembled:

1x Flex clutch lever
NOTE:
All screws, bushings, springs and nuts can be re-used from the
original lever.
Before assembly, these parts must be cleaned thoroughly and, if
necessary, greased.
Assembly:
- Unscrew the original screw
lever to the left.
- Attach/mount the original bushing and spring

lever to the Flex lever (scope of delivery).
- Position the Flex clutch lever and mount the original screw
tighten it with 8 Nm.
! CAUTION:
Ensure that the lever is assembled correctly. Ensure that the
clutch is functioning correctly before using it for the fi rst time.
The desired pressure point can be regulated with the adjusting
wheel.
7870293104404
8130293104468

and pull out the original clutch

from the original
