EQUYSIS EF-A Manual De Usuario página 44

Mode of Measure Conf iguration
Press Press
3. Calibration
4. Test
5. Detail
44
Parameter Item
Press
3.1 Zero Trim
3.2 Tube Trim
3.3 Loop Trim
3.4 K Character
4.1 Loop Test
4.2 Pulse Test
4.3 Coil Test
5.1. Size (mm)
5.2. Sensor K
5.3. Convert K
5.4. Revise
5.5 Coil Current
5.6. Coil Freq
5.7. Power Freq
5.8. Act Zero (mV)
5.9. AZ Range (mv)
5.10. Empty Freq
5.11. Full Freq
5.12 Logo
5.13 Loop Mode
5.14. Save Settings
5.15 Password Protect
www.equysis.com
Secondary Parameter
Item
3.2.1 Empty Trim (NO, YES)
3.2.2 Full Trim (NO, YES)
3.2.3 Tube Region-% (Max: 99.9 Min: 0.0)
3.3.1 4 mAmp Trim (Max: 5.000 Min. 3.000)
3.3.2 20 mAmp Trim (Max: 21.000 Min: 19.000)
(Max: 1.030000 Min:0.970000)
(Max: 20.0 Min: 4.0)
(Max: 5000.0 Min:1.0)
(Max: 99.90000 Min: 0.01000)
(Max: 99.90000 Min: 0.01000)
4.1 PresetZero(mV) (Max: +29.999 Min: -29.999)
4.2 F. Offset m3/h
4.3 V.Offset m/s
4.4 PresetZero(mV)
4.5 PZ Range Lower
4.6 PZ Range Upper
4.7 Speed_# m/s
4.8 Revise_#
max: 300.00 min: 100.00
3.125 / 6.25 / 12.5 / 25
50Hz / 60Hz
(Max: +99.9900 Min: -99.9900)
(Max: 99.9 Min: 0.0)
(Max: 9999.0 Min: 0.0)
(Max: 9999.0 Min: 0.0)
No / Yes
4-20mA / 4-12-20mA
No / Yes