Tools Needed; Vehicle Preparation; Flange Mounted Installation Instructions - Horton VMaster Instrucciones De Instalación

ENGLISH
Flange Mounted Fan Drive Installation
Instructions for 9901000, 9902000, 9902001,
9902002, 9902008, 9902009, 9903000 &
9903005

Tools Needed

•
•
•

Vehicle Preparation

1. Turn the vehicle ignition off, apply the vehicle's
parking brake, and block the vehicle's wheels.
Use care to protect the radiator from damage during the
replacment of the fan drive.
2. Remove the fan from the fan drive and place out of
the way of the fan drive mounting bolts.
3. Remove exisiting fan drive on your vehicle
4. For best results, check and replace any worn belts.
5. Check fan for any damage and clean radiator prior to
installation.
6
3/8" Drive Torque Wrench
3/8" Drive Ratchet, Extension, and Sockets
(Metric and English)
Wrench set
NOTE