Maintenance - RedMax BLi200ZR Manual De Usuario

1. Put the battery in the battery charger. Make sure that the battery is
connected to the battery charger. (1), (2).
2. The green charging light on the charger is lit when the battery is
connected to the battery charger. (4).
3. When all LEDs are lit the battery is fully charged.
4. Remove the battery from the battery charger. Use the battery in
surroundings where temperatures are between -10 °C (14°F) and 40
°C (114°F).
CAUTION: Use the battery charger only when the surrounding
temperature is between 5 °C (41°F) and 40 °C (114°F).

MAINTENANCE

Maintenance
Keep the battery guide tracks clean. Clean plastic parts with a clean
and dry cloth.
Make sure the battery and battery charger are clean and that the ter-
minals on the battery and the battery charger are always clean and dry
before the battery is placed in the battery charger.
Keep the battery guide tracks clean. Clean plastic parts with a clean
and dry cloth.
6 – English
BLi200ZR_Redmax.indd 6 2017-09-27 16:06:00