Setting Up Your Shelf System; Connecting The Power Cord; Connecting The Speakers - Insignia NS-A2110 Guia Del Usuario

# Description
16 TUNING knob
17 FM stereo indicator
18 BAND selector
19 Display

Setting up your shelf system

Connecting the power cord

To use AC power:
1 Make sure that your local AC power source matches the voltage
shown on the plate located inside the battery compartment. If it
does not, consult your dealer or service center.
2 Connect the power cord to the AC power connector on the shelf
system, then plug it into the AC power outlet.
3 To completely turn off the shelf system, unplug the power cord
from the AC power outlet.
Caution

Connecting the speakers

Connect the speaker wires to the back of the CD/Radio player as
shown in the following illustration.
8
Function
Turn to tune to desired radio station.
Indicates if the radio is receiving FM stereo.
Choose from AM, FM, or FM ST.
Displays the clock as well as information about the
CD or radio.
To protect your shelf system, unplug the power cord from
the AC power outlet during heavy thunderstorms.
Press
www.insignia-products.com
Insignia NS-A2110 Executive Shelf System
Right
speaker
Red
Left
speaker
Red
Black