Silverline 850W Traducción Del Manual Original página 7

263965
Cleaning
• Keep your tool clean at all times. Dirt and dust will cause internal parts
to wear quickly, and shorten the machine's service life. Clean the body of
your machine with a soft brush, or dry cloth. If available, use clean, dry,
compressed air to blow through the ventilation holes
• Clean the tool casing with a soft damp cloth using a mild detergent. Do
not use alcohol, petrol or strong cleaning agents
• Never use caustic agents to clean plastic parts
• Use water, a suitable cleaning solution, or mild solvent to clean rests of
material off the accessory. Wear appropriate protection equipment whilst
cleaning, including eye, hand and breathing protection
Note: Dispose of rest material and contaminated cleaning solution
according to regulations. Recycle where possible. Only use non-water
solvents where absolutely necessary and always follow the manufacturer's
guidelines for safe usage.
Lubrication
• Slightly lubricate all moving parts at regular intervals with a suitable
spray lubricant
Brushes
• Over time the carbon brushes inside the motor may become worn
• Excessively worn brushes may cause loss of power, intermittent failure,
or visible sparking
• If you suspect that the brushes may be worn, have them replaced at an
authorised Silverline service centre
Note: One set of Spare Brushes is supplied with this tool.
Storage
• Store this tool carefully in a secure, dry place out of the reach of children
• ALWAYS remove all material from the accessory, clean and dry the tool
before storage
Disposal
Always adhere to national regulations when disposing of power tools that
are no longer functional and are not viable for repair.
• Do not dispose of power tools, or other waste electrical and electronic
equipment (WEEE), with household waste
• Contact your local waste disposal authority for information on the correct
way to dispose of power tools
www.silverlinetools.com
850W Plaster Mixer
7