Master Forge BG179B Manual Del Usuario página 7

REVERSE REFRIGERATOR DOOR
4. Unscrew the M4x10 screws under the
fridge to remove the support bracket and
decorating bar from the fridge. Then,
unscrew hinge 7 from the bottom right
corner of the fridge. Remove the fridge
door.
NOTE: There are 4 M4x10 screws
pre-assembled to the fridge. An extra
M4x10 screw (HH) has been included in
case one of the four pre-assembled screws
goes missing or becomes damaged.
5. Remove the six M4x12 screws securing
the hinge 1 and the hinge 2 on the top right
and bottom right corners. Set the hinges
aside and reinstall the six screws. Remove
the six M4x12 screws on top left and bottom
left corners. Secure hinge 5 (FF) and hinge
6 (GG) to the top left and bottom left corners
with the six screws.
6. Install the door to the fridge and insert hinge
7 to the bottom right corner of the fridge.
Re-attach the support bracket and
decorating bar to the fridge by tightening the
M4x10 screws removed in step 4.
4
5
6
Hinge 7
7
Hinge 7
FF
GG