Publicidad
Idiomas disponibles
Idiomas disponibles
How to use your Card Reader
The multicard reader provides four slots for the most popular card formats. Insert your
cards in the right slot according to the description included below.
Card Slot Description
1. MS Slot: supports Memory Stick Pro, DUO, Pro Duo, M2*.
2. SD™/MMC Slot: supports SD™, miniSD™ card, MMC, miniSD™ HC,
microSD™ (T-Flash), RS MMC* and MMC micro*
3. M2 Slot: supports genuine SD™ memory stick micro M2.
4. CF Slot: supports compact ash card, microSD™ (T-Flash).
*Requires the use of an adaptor.
Warning: Insert the memory card carefully in the right direction. Please do not attempt
to force cards into the slot. This may damage the device or the card, leading to the
corruption or lost of your valuable data
Important:
• For preventing any damage or data loss, do not remove the memory card or
disconnect this card reader while data is being transmitted.
• To safely remove your card reader and memory card, please follow the standard
Windows USB unplug procedure.
• In case of any operating error as a result of the malfunctioning of the card reader,
please unplug it and re-plug again; this will reset the device in order to resume normal
operation of the device.
MS Slot
M2 needs to have an adaptor
SD™/MMC
slot
microSD™ (T-Flash) /RS MMC /
MMC micro need to have an adaptor
Publicidad
