Before Use - Hitachi RP 350YDM Instrucciones De Manejo

Read the operating manual carefully before starting to use the
vacuum cleaner. It provides important instructions for the operation,
safety, care and maintenance. Keep the operating manual in a safe
place and, in case you sell the unit, hand it on to the next owner.
The manufacturer reserves the right to carry out modifi cations to
the design and equipment.
Any other work not covered by this operating manual must not be
carried out.
2 Indicator and operating elements
Select from the following functions and settings:
0 Vacuum cleaner is switched off
I Vacuum cleaner is running
IR Vacuum cleaner is running
AR Ready for operation
Automatic shaker function
Fill level indicator
Setting the suction hose diameter
000Book̲RP350YDM.indb 25 000Book̲RP350YDM.indb 25

1 Before use

▶ When unpacking, check that the delivery is complete and that
there is no transport damage.
▶ Before using, the operators should be provided with information,
instructions and training for the use of the vacuum cleaner
and the substances that it is to be used for, including the safe
procedure for the removal of the gathered material.
- Plug socket current-conducting
- Plug socket current-conducting
- Automatic shaker function off
- Plug socket current-conducting
- Automatic shaker function on
- Plug socket curren-conducting
- Automatic shaker function on
- The vacuum cleaner is switched on and off via the connected electrical/
compressed air tool at the plug socket.
- During suction, the folding fi lter cassettes are cleaned alternately when a
specifi c negative pressure is reached, at which there is still adequate suction
air.
- When the container is full and/or there is a blockage in the suction hose, the
full indicator lights up. On the M and H vacuum cleaners, an acoustic signal
is also emitted.
- Determine the maximum negative pressure for automatic shaking.
de
en
fr
es
pt
it
nl
da
sv
no
fi
el
tr
pl
hu
cs
sk
ro
sl
hr
bg
en - 25
2015/03/06 15:11:49 2015/03/06 15:11:49