Ultimate GHARGER PRO-8 Manual De Usuario página 30

10.00V 20.0A
Pi:200W Ef:84%
9>Measure External Temperaturee
9>Measure Ext.
Tempra: 0C
A>Measure Input Voltage and Output Voltage
A> Measure VOL
I:12.1V O:19.87V
28
Status display.this screen check out the output signal and motor RPM
In this program, you can easily calculate the thrust of a propeller.
Press " DEC " or " INC
thrust calculator and its power.After setting the RPM,please press"Start/Enter" for
more than 3 seconds to start the next process.
In this program, the charger can measure the external temperature by using a
temperature sensor.
In this program, the charger can measure the DC voltage of an object.
" button, you can set up the RPM,the screen display the
GHARGER PRO-8