Noblex aspherilux midi LED Instrucciones Para El Uso página 14

The smart charging technology that has a replaceable head system is fitted
with a Delta-U and time controlled switch-off mechanism as well as with a
temperature checker for the batteries. The device is compliant with all rele-
vant standards of electromagnetic compatibility, the safety of laser products
and the restriction of the use of certain hazardous substances (RoHS).
VERSIONS
The NOBLEX
COMMISIONING & OPERATION
The integrated batteries are pre-charged only.
Commissioning
Prior to any use, the LED spotlight should be charged first. To this effect, please
read the "Charging" section in these instructions for use. Pass the hand strap
with the thin loop through the recession on the bottom side of the battery
compartment lid first and then pull the broad ribbon through the thin loop.
Operation
The NOBLEX
and off.
Charging
Basically, the charger may be used in closed rooms and for charging the
NOBLEX aspherilux midi LED only.
®
1. Connect the connecting cable (6) of the plug charger with the charging
station (5).
2. Put the NOBLEX
the charging station (5) as depicted below. Any wrong placement of the
lamp into the charging station is impossible.
3. Connect the plug charger (6) to a 220V mains outlet.
The control display on the plug charger indicates the charging process as
follows:
LED
green flash light
red permanent light
green permanent light
red flash light
12
aspherilux midi LED is available in green and anthracite finish.
®
aspherilux midi LED is fitted with a push-button for switch on
®
aspherilux midi LED in switched-off condition into
®
Meaning
Mains connection is available
Quick charge is going on
Trickle charge is going on
An error has occured