Craftsman 580.752420 Instrucciones De Uso página 6

KNOW YOUR PRESSURE WASHER
I! ii!1
R ead the
Operator's
Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various
controls and adjustments. Save this manual for future reference.
Spray Gun ProjectPro
TM
Nozzles
Nozzle Extension
with Quick Connect
Model Data Decal
High Pressure Hose
Recoil Starter
Fuel Cap
Air Filter
Throttle Control Lever _
Oil Fill Cap and Dipstick
Water Inlet
High Pressure Outlet
Choke Lever
Pump equipped with
Automatic Cool Down System
Air Filter -- Protects engine by filtering dust and
debris out of intake air.
Automatic Cool Down System -- Cycles water
through pump when water reaches 125°-155°F. Warm
water will discharge from pump onto ground. This
system prevents internal pump damage.
Choke Lever i Used to help start a cold engine.
Detergent Pick-Up Tube and Filter - Use to draw
detergent from chemical bottle to the low pressure
water stream.
Fuel Cap - Fill engine with regular unleaded fuel here.
High Pressure Hose - Connect one end to the spray
gun and other end to the high pressure outlet.
High Pressure Outlet - Connection for high pressure
hose.
Model Data Decal - Provides model and serial number
of pressure washer. Please have these readily available
when calling for assistance.
Detergent Pick-Up
Tube and Filter
Nozzle Extension with Quick Connect i Allows you
to switch between four different nozzles.
Oil Fill Cap and Dipstick - Check and fill engine with
oil here.
ProjectPro
TM
Nozzles -- Detergent, Max, General,
and Delicate nozzles: for various cleaning applications.
Pump - Develops high pressure water.
Recoil Starter - Used for starting the engine
manually.
Spray Gun - Controls the application of water onto
cleaning surface with trigger device. Includes trigger
lock.
Throttle Control Lever- Sets engine in starting
mode for recoil starter and stops running engine.
Water Inlet - Connection for garden hose.