Publicidad
DODGE - RAM 1500 2019
INSTALLATION MANUAL
SUPER BOLT INSTALLATION
16
PRESS SUPER BOLTS STUDS
A
A
A
A
ATTENTION
FOR GOOD
ADHESION IT IS NECESSARY TO APPLY
AS MUCH PRESSURE AS POSSIBLE ALL OVER THE
EDGE AND CENTER OF THE SUPER BOLTS STUDS.
SUPER BOLT STUDS
H
PRESSURE POINTS
40-50 N/cm
2
A full surface contact between tape and substrate is decisive for good adhesion performance.
Contact is achieved by applying pressure.
In practice a pressure between 40 and 50 N/cm² is usually needed and an application temperature
between 25 and 45 °C or 77 and 113 °F is also necessary.
During application, add-on parts and tapes must have the similar temperature.
www.warn.com
DATE: 02.25.19
PG. 5
Publicidad
