Troubleshooting - Lenco HS-100 Manual De Instrucciones

Scan width
Scan length
File format
LCD
Auto Power Off
USB Port
External memory
Standard Battery
8. Computer system minimum requirement
Operating system
CPU
RAM
Interface

9. Troubleshooting

Problem
Cannot turn on the
scanner
Pictures cannot be
saved when you are
scanning them
Computer does not
recognize your
scanner when
connected. (You
cannot find
removable disk)
The battery life is
very short
Blurry images
ERR. LED is on when
scanning a document
10.ABBYY® Screenshot Reader
For help with OCR software applications, please refer to the help menu in software CD.
21cm (8.27")
300DPI : 127cm (50") (Max), 600DPI : 63cm (25") (Max)
JPEG
Scanning status display
3 Minutes
USB 2.0 high speed
microSD Card (not included)
2XAA alkaline batteries
Windows 7 / Vista / XP and Mac OS 10.4 or above
(direct plug-in, driver installation not required)
Pentium II or above
64MB
USB port
Cause
1. Low battery power
2. Battery not inserted properly
1. Micro SD card has not been
installed
2. Memory is full
3. The micro SD card has not
been formatted properly
Connection failure
Use wrong type of battery
The lens of scanner is dirty
Scanning speed is too fast
Solution
Replace or install the
battery correctly
1. Install micro SD card
2. Download the pictures from
the scanner to the computer
to create storage space
3. Please refer to section 4.3
Make sure all cable connections
are secured. Restart the computer
if necessary
Replace with new A-Brand 2x AA
alkaline batteries
Clean the lens with soft dry cloth
Press the Power/Scan
reset and scan again the document
button to