Protection Of The Environment - Lanaform Handy Clipper Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44
Always attach the power supply cable to the unit before connecting the adaptor to the power supply. Always disconnect the unit when it is not being used.
Only use this unit for the purposes for which it was designed, as described in this manual. Do not use accessories that are not recommended by the manufacturer.
In order to avoid any damage to the skin, great care is needed when using the unit without the guide comb/cutting guide. If the guide or the blade is damaged or
broken, stop using the unit immediately and replace them, continuing to use the unit may result in the skin being scratched or cut.
If the power supply cord is damaged, it must be replaced by a special power cord or a similar one available from the supplier or his after-sales service.

Protection of the environment

Before disposing of this product at the end of its useful life, you must remove the rechargeable batteries. Follow the procedure described below :
1. Disconnect the unit from the electrical power supply.
2. Using a suitable screwdriver, remove the screws situated on the back of the unit.
3. Remove the cover. Disconnect the battery pack.
4. The internal batteries used with the unit are nickel-cadmium; these batteries must be recycled or disposed of correctly. Do NOT throw Ni-Cd batteries in
your (ordinary) dustbin.
5. You may now dispose of the main clipper unit in complete safety
26

Publicidad

Tabla de contenido
loading

Tabla de contenido