Naxa NAS-5000 Manual Del Usuario página 12

8. There will be voice instructions
during the connection process.
<
PLEASE WAIT
Wait for device to be
3
connected to Wi-Fi...
Don't operate device during Wi-Fi setup.
Please wait for competion of setup
patiently. It's usually finished in 60
seconds.
Cancel
If you hear the voice prompt with an error
message, please go back and retry.
Once connected, the following screen
10.
will appear, tap Custom to change to
the desired location name, or tap one
of the names listed below.
<
NAME DEVICE
Custom...
NAS-5000_xxxx
Bathroom
Bed Room
Den
Dining Room
Family Room
Foyer
Garage
Garden
9. When the speaker is successfully connected
to the Wi-Fi, the Mode Indicator on top
of the speaker will stay lit.
If connection fails, please try again and
repeat the above steps.
CONNECTED
Device is connected to XXXX
successfully
Current Wi-Fi strength of device:100%
Next
11. Select the desired Language for Alexa.
CHOOSE LANGUAGE
Please choose your prefered
language for Alexa.
English(United States)
English(United Kingdom)
Deutsch
12