Soba XH210 Modo De Empleo página 4

XH210 UPRIGHT FAN HEATER
1. Temperature Rotary Knob
2. 4-P Rotary Knob
3. Indicator Light
4. Grill
5. ON/OFF Swing Switch
GETTING TO KNOW YOUR FAN HEATER
HOW TO OPERATE
1. Remove your heater from its carton and unwind the cord to its full length.
2. Place the heater on a horizontal, flat surface.
3. Set the 4-P Rotary Knob to the "O" position.
4. Plug the Power Cord into a mains socket.
5. Turn the Temperature Rotary Knob to "max " position, then set the 4-P Rotary
Knob at the
temperature, turn the Temperature Rotary Knob slowly clockwise until you
hear a click. This sets the heater to cycle on and off to maintain the required
temperature.
6. Turn the Swing ON/OFF Switch on when you want the heater to oscillate at an
angle of 90º for a better distribution of the hot air.
7. To switch off turn the 4-P Rotary Knob to the "0" position, then unplug from the
mains socket.
Note: This heater is fitted with a safety mechanism that switches it off
automatically as soon as the heater is tilted.
or position. When the room has reached the desired
1
4
INSTRUCTION MANUAL
2
3
4
5