Maintaining Your Speaker - Insignia NS-BT400 Guia Del Usuario

To connect other audio devices directly to your speaker:
1 Disconnect the Bluetooth connection to any other audio devices.
2 Insert one end of the 3.5 mm stereo input cable into the AUX IN
jack on the back of the speaker, then insert the other end of the
cable into the Audio Output (or equivalent) jack of the audio
source.
3 Turn on the audio source device and play music.
4 Press the VOL– or VOL+ button to adjust the volume to a
comfortable level.

Maintaining your speaker

Wipe the case with a soft cloth. If the case is very dirty, moisten the
cloth with a weak solution of non-caustic detergent and water.
10
www.insignia-products.com
Insignia NS-BT400
AUX IN
jack
AUX IN DC 12V IN