Ce Marking - Corradi Defense Manual Del Usuario

Defense
Demolition
To ensure sustainable use of natural resources, the product is designed to be demolished in an environmentally friendly way at the end of its life
cycle.
The components can be separated and disposed of in a specific way, and they are not considered as dangerous. Consequently there are no
particular indications for scrapping and disposal, only the existing local regulations for the disposal of the components at the time of demolition.
Disassembly must be carried out by qualified personnel, in order to avoid any risk.
Before working with any parts connected to the mains, it is mandatory to disconnect the product.
During demolition it is necessary to separate plastic parts and electrical components (represented by a symbol with crossed out wheelie bin),
which must be sent to separate waste collection in compliance with current regulations.
As regards the metal mass of the product, simply separate the steel parts from those made of other metals or alloys for proper recycling through
fusion.

CE MARKING

Position of the CE marking label on the framework
12 of 17
Facsimile of the CE Marking for DEFENSE versions 11 and 14
Reference
no. of the
D.o.P.
Unique identification
code of the product-type
Intended use as defined
by the European standard
applied
Level or Class of
performance declared
Corradi SrL - USer manUaL
Name or identifying mark
and registered address of
the manufacturer
Corradi S.r.l., Via Brini 39, I-40128 Bologna ITALY
Macro-GROUP_YYYY. Mm
Unique product-type MODEL
identification code SERIAL NO.
External use in buildings and other constructions
Wind load resistance: See D.o.P.
Total solar energy transmittance gtot:
See document "Fabrics Gtot"
No. of the European
Regulation applied as
indicated in the OJEU
EN13561:2015
17
Last 2 digits of the year in which
the CE marking was applied for
the first time
rev. 0 - 03.2017