Lanberg SWV-HDMI-0003 Manual De Instrucciones página 7

5. Installation guide
1) Plug in the input (transmitting) devices to the HDMI ports labeled as Input ports (e.g. console, PC, Blu-ray player etc.).
2) Connect the output device to the HDMI port labeled as output (e.g. TV, monitor, projector etc.).
3) Attach the power supply to the switch via micro USB cable. USB-A connector must be connected to a free USB-A port on a
wall charger / PC / console.
4) Turn on the transmitting device that you currently want to use and then switch on the receiving device.
6. General safety precautions
1) When connecting and disconnecting HDMI cables, it is advised to do it slowly and gently. Pulling out or pushing in the
connectors too hard may damage the device(s) and / or the cable itself.
2) When using the device, it is recommended to use HDMI cables that support HDMI 2.0b standard, as they are the Premium
High-Speed HDMI cables version. Use of cables compatible with the lower standard may result in worse audio-video
quality.
3) Avoid installing the HDMI switch in places where the device may encounter moisture.
4) Device is made for indoor use only
5) Do not expose the device to direct sunlight
6) Do not open, repair or in any other way interfere with the device by yourself.
7) Any improper use or man-made damage is not covered by the product warranty.
7. Connection scheme
Input up to 3 m
Output up to 3 m
HD-DVD
PC
INPUT
PS3/4
HDMI SWITCH
OUTPUT
EN
HDMI TV