Configurazione Del Prodotto - D-Link DSL-2745 Guia De Instalacion

CONFIGURAZIONE DEL PRODOTTO

DEFAULT SETTING
Router Power Supply
Router
Router
Internet
Save
16
Passaggio 1
Power Adapter Connection
Plug the Power adapter Unit into the wall outlet and then connect
the other end of it to the Power port of the router (12VDC IN). Switch
on the plug point on.
Passaggio 2
LAN connection
Connect the Ethernet LAN cable to any (Yellow) port on the router
and connect the other end to the LAN port of the PC.
PC
Passaggio 3
DSL Port Connection
Connect the (DSL) port of the Router, using the (gray) telephone
cable to the port marked ( DSL) on the splitter. Connect the short
(Line) cable attached to the splitter to connect the telephone wall
Telephone
socket.
Wall socket
Passaggio 4
Dal computer collegato al router, aprire un browser Web e accedere
all'indirizzo http://192.168.1.1. Enter admin as the User Name and
Password, and you may use the Setup Wizard to configure your
DSL-2745.
INDIRIZZO IP:
NOME UTENTE:
PASSWORD:
http://192.168.1.1
admin
admin
DSL-2745