INSTRUCTION MANUAL CODE 80259 REV 0 January/2011
Technical Specifi cations
Code
Flask volume (ml)
Ø Flask (aprox) (mm)
Height / Width / Depth (cm)
Power (W)
Ø External probe
Range de Tª (ºC)
Temperature variation (ºC)
Weight (Kg)
J
.P. SELECTA, s.a.
General Information
Handle the parcel with care. Unpack and check that the contents coincide
with the packing-list. If any part is damaged or missing, please advise the
distributor immediately.
Do not install or use the equipment without reading this handbook before.
This instructions manual must always be attached to the equipment and it
must be available for all users.
If you have any doubts or enquiries, please contact your supplier or J.P. Selecta.
If any modifi cation, elimination or lacking in maintenance of any device of the
equipment by the user could be dangerous, the manufacturer is not responsible
for the damage that can occur.
Do not use the equipment with liquids which can give off vapours capable of
making explosive mixtures.
Packing List
The standard equipment consists of the following components:
Heating mantle
Power supply cord
External temperature supply
Instruction Manual
Accessories
This equipment has the following accessories:
Part
SUPPORT BAR 12mm diameter x 750mm long
DOUBLE BOSSHEAD
SPRING clamp to hold thermometers
CLAMP to support and hold condensers
3031470
100
250
65/67 83/87
11/14/18
160
160
4
4
From ambient temperature +5 to 400º
From 0.5 to 1 sample depending
1.5
3
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - http://www.jpselecta.es
(It can be modifi ed without notice)
1
1
1
1
6000270
3031471
3031472
500
1000
102/105
132/139
12/18/24
12/18/24
300
420
4
4
3.5
4
Tel (34) 93 770 08 77 Fax (34) 93 770 23 62
Page: 6
Code
1000069
7000025
7000161
3031473
3031474
2000
164/170
13/21/27
15/25/31
760
4
5