Serial Connections (Strings) Of Solar Panels; Dc Load Output Voltage And Maximum Discharge Current - inti CEDRO Serie Manual De Usuario

MOUNTING ON WALL
STEP 1
MEASURE AND MARK THE DISTANCES ON THE WALL, DRILL Φ6MM, INSERT
PLASTIC EXPANSION PARTICLES AND TIGHTEN.
STEP 3
HANG THE CONTROLLER TO
THE MOUNTING BACKBOARD
ACCORDINGLY.

SERIAL CONNECTIONS (STRINGS) OF SOLAR PANELS

System voltage
12V
24V
36V
48V

DC LOAD OUTPUT VOLTAGE AND MAXIMUM DISCHARGE CURRENT

The controller has DC load output function, and its output voltage range is the same as the battery bank. For example, if the battery voltage is
25,2Vdc, then the instantaneous output DC voltage will also be 25,2Vdc.
The Cedro controller can supply DC load continuously if the DC load current is within the nominal range of the controller.
Mode
0
1~14
15
16
17
16
CEDRO CONTROLLER ICC-6048150 / ICC-5048150 / ICC-4048150 / ICC-3048150 / ICC-2048150 / ICC-4024150 USER MANUAL
STEP 4
TIGHTEN AND FIX THE CONTROLLER TO THE MOUNTING
BACKBOARD WITH M4 SCREWS.
Voc * N = PVinput < 150Vdc
Voc<23V Voc<31V
Max. Best Max. Best
6 2 4 1
6 3 4 2
6 4 4 3
6 5 4 4
Definition
The PV voltage turns on the load switch according to light control delay.
Light switch control
The PV voltage turns on and shuts down the load switch according to settings.
Light+time control
Turns on/off the load by pressing the "S" button
Manual switch
Turns on the load immediately with no delay and then turns off.
Testing switch
The load keeps on until the battery low voltage disconnects.
Always on
STEP 2
ALIGN THE HOLES OF THE MOUNTING
BACKBOARD TO THE HOLES INT HE WALL, FIX
IT WITH M5 SCREWS.
NOTE
The above steps are suitable for general wall installations. If the
controller is installed in a wooden wall, use self-tapping screws
to fix it directly.
Be cautious to the controller installation position, keep a 20cm
space up and down the controller for proper ventilation and heat
dissipation.
The ambient temperature of the installation place must be
between -20ºC y 50ºC, otherwise the controller might not work
properly.
Voc<34V Voc<38V Voc<46V
Max. Best Max. Best Max. Best
4 1 3 1 3
4 2 3 2 3
4 3 3 3 3
4 3 3 3 3
Description
Voc<62V
Max. Best
1 2 1
2 2 1
2 2 1
2 2 2
www.intipv.com