Control Screen; Web Server - BeeWi BLCSC Guía De Utilización

6
It is possible to control the On/Off switch directly from the Smart LED Strip box without
opening the control screen.

3.2. Control Screen

The default screen is the current state (RGB). In the control screen, it is possible to
program specific behaviors such as:
- Manual switch
- RGB colors
- Brightness
- Specific color sequence
Note the settings will automatically be stored in memory
3.3. Edition Screen
The edition screen allows for editing Smart LED Strip details such as name and picture.
It also includes other settings such as wake up and sleep times, On and Off timers and
group edition to group multiple LED Strip within a single control.
The edition screen also includes a button to update Smart LED Strip to latest firmware.
To update the firmware, just press the "Update peripheral" button in Edition screen, then
confirm action and wait for about 3 minutes for the firmware update to be confirmed.
4. GATEWAY MODE
4.1. Introduction
The Smart LED Strip can be also controlled distantly via the internet using a specific inter-
net gateway. In that case, it is necessary to use a different web application as described
in the BeeWi Gateway manual.
4.2. Pairing
In order to register the Smart LED Strip as part of the Beewi-home network, it is necessary
to pair it securely with the Master Gateway. To do this, follow these steps:
1) For safety, turn off the power before fitting the LED in the socket.
2) Turn on the power. The LED Strip will be visible for pairing during one minute after it
has been powered on.
3) Press the Gateway button until the LED flashes twice per second to initiate pairing.
4) Once Smart LED Strip has been successfully paired with the Gateway, the new peri-
pheral will show in the web app home screen.

4.3. Web server

Go to the Beewi-home portal using a web browser or the web app to access your periphe-
ral.
Using the portal under your own account, it will be possible to access some of the func-
tions supported by the SmartPad app:
- Smart LED Strip status: On/Off, RGB status
- Action settings: switch Smart LED Strip On and Off manually or depending on time.
ENGLISH