Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2
Dynex DX-OP7CC
7-Sheet Crosscut Shredder
Contents
Important safety instructions........................................................... 2
Features ........................................................................................... 2
Setting up the shredder ................................................................... 2
Using the shredder........................................................................... 2
Specifications ................................................................................... 3
Warranty .......................................................................................... 5
Français ....................................................... 6
Español ...................................................... 10
Important safety instructions
Warning: Carefully read this user guide before using the paper shredder.
Warnings
• Keep your fingers away from the feed slot, or they could be
seriously injured.
• Never run the shredder continuously for more than 3 minutes or
for more than 50 sheets, or the motor may overheat and
temporarily turn off the power (to allow the shredder to cool
down). If this happens, move the switch to the off position for 30
minutes (at 86
30
°F or
• Keep the shredder out of reach of children and pets.
• Keep jewelry, long hair, and loose clothing (especially sleeves and
neckties) away from the feed slot. If anything unintentionally gets
caught in the feed slot, immediately cut off power.
• Crosscut shredders have very sharp, exposed blades on the
underside, so be careful when mounting the shredder on the
waste basket.
• Fire danger: Never dispose of flammable chemicals (for example,
nail polish, acetone, or gasoline) or materials that have come into
contact with flammable chemicals (such as cleaning rags) in the
waste basket.
• Always turn off the shredder and unplug the power cord before
cleaning or moving the shredder, or emptying the waste basket.
• Never place the shredder near water, moisture, or any heat source.
• Keep the waste basket emptied so that the shredder output is not
blocked.
• Never use any petroleum-based or flammable oils or lubricants in
or around the shredder, because these substances can combust,
causing serious injury. Never spray any aerosol-based products in
or around the shredder.
• Never shred envelopes, labels, or anything with glue or sticky
substances, or paper jams can result.
• Do not use the shredder if the power cord is damaged in any way.
• Do not try to service this product yourself. Doing so may expose
you to sharp cutting blades and electrical shock, and will void the
manufacturer's warranty.
• Never let the waste basket become full, or the shredder output
will be blocked, and material will be pulled back up into the
shredder, causing jams.
• Never shred wet paper.
• Never try to clean or clear the shredder blades.
• Use the REV mode sparingly, because overuse may cause shreds of
paper to build up in the feed slot and reduce shredding
performance.
C) before trying again.
°
Features
Card slot
Paper slot
Switch
Shredder unit
Clear window
Waste basket
Setting up the shredder
To set up the shredder:
1 Mount the shredder securely to the rim of the waste basket.
2 Connect the power cord to any standard 120V AC power outlet.
Using the shredder
Shredding paper
To shred paper:
1 Move the switch to On/Auto.
2 Insert paper into the center of the paper feed slot, or insert a credit
card into the center of the card feed slot. The shredder will
automatically shred the item.
Note: Small papers should be inserted into the center of the paper feed slot,
or the shredder cannot detect that the paper is inserted.
After the shredding is complete, the shredder will stop
automatically.
Important: To guarantee normal operation, shred a maximum of 7 sheets
of paper (or one credit card) at a time.
Contents
Power cord
Power plug
Handle
Publicidad
Capítulos
Tabla de contenido
