STEP 2:
Attach Base (C) to Bottom Seat (A) by using 4 Short bolts (2) , 8 Washers (3) and 4
Nuts (4) with Wrench (6) and Allen wrench (5). (NOTE: Use one Washer (3) on one
Short bolts (2) and get the Short bolts (2) through each hole. Then place another
Washer (3) and Nut (4) on the end of this Short bolts (2).
PLEASE MAKE SURE THE RED DOT STICKER ON CHAIR BUCKET
AND CHAIR BASE ARE FACING THE SAME DIRECTION.
A
B
C
5
2
3
3
4
6