Rear Wheels Installation; Front Wheels Alignment; Armrest Adjustment; Backrest Adjustment - Belluno baby RIMINI Manual De Instrucciones Para Armado Y Uso

03

REAR WHEELS INSTALLATION

• As shown in Fig. 6, insert each of the wheels into the rear axle until you
hear a "click".
• Make sure they are locked and cannot be removed.
• To remove the rear wheels, press the steel tab on the rear of the axle.
You will find one for each wheel. Help yourself with the other hand to
remove the wheel from the side.
6
04

FRONT WHEELS ALIGNMENT

• If the locks are raised (Fig. 7), then the front wheels will stay in a fixed
position.
• Otherwise, if the locks are down, the wheels will swivel (Fig. 8).
7
14
8
360
05

ARMREST ADJUSTMENT

• Insert the front bar into the structure
of the stroller and press down until a
"click" sound is heard.
• Simultaneously, press both plastic
locks located on the lower part of the
armrest.
• You can move the T towards the inside
of the seat or downwards (Fig. 9).
06

BACKREST ADJUSTMENT

• The backrest is multiposition.
• With one hand, hold the strips; with the other hand, press the hook (Fig.
11 and 12).
• Slide it up or down, depending on the desired position for the backrest.
10
9
11 12
15