Troubleshooting - HQ EL-PIR70 Manual Del Uso

Troubleshooting

Malfunction
The load will not work
The load work always
The load work without any
identifiable movement
The load will not work
despite movement
NOTE: the high-frequency output of the HF sensor is <10Mw- that is just
one 100th of the transmission power of a mobile phone or the output of a
microwave oven.
Cause
• wrong light-control
setting selected
• load faulty
• mains switch OFF
• continuous movement
in the detection zone
• the sensor not
mounted for detecting
movement reliably
• movement occurred,
but not identified by
the sensor(movement
behind wall, movement
of a small object
in immediate lamp
vicinity etc.)
• rapid movements are
being suppressed
to minimize
malfunctioning or the
detection zone you
have set is too small
< 10mW approx. 1000mW
3
Remedy
• Adjust setting
• Change load
• Switch ON
• check zone setting
• securely mount enclosure
• Check zone setting
• Check zone setting