Publicidad
Idiomas disponibles
Idiomas disponibles
QUICK GUIDE
OPERATION
1.
Insert the batteries on its compartment.
2.
Use the supplied screwdriver to select a desired channel, this must be the same for the microphone and the receiver. When two or more
transmitters and receivers are being use in the same location, they must be set up to use different channels. If existing channel is being
interfered, please change to non-interference channel. If it's necessary, adjust the micro sensitivity with the gain regulator placed on the
back panel.
3.
Turn on the power switch, the Led will light green. The Led will
change to red in case of low battery.
The applicable frequencies listed in the table can be officially used in the countries where the Decision ERC/DEC(01)18 is implemented: AT, BE, BG, CY, CZ, DK, EE, FI, FR, DE, GR, HU, IE, IT, LV,
LT, LU, MT, NL, PL, PT, SK, SI, ES, SE, GB (Limited). Countries not listed may allow using those frequencies subject to their local regulations.
* Note: Please contact your national frequency authority to get information on the available legal frequencies for your area and legal use of the equipment.
CONNECTION EXAMPLES
ST-850PT Version 1.0
Channel
1
2
3
4
5
6
7
8
2/2
WIRELESS DESK MICROPHONE
FREQUENCY LIST*
Frequency
Channel
863.125 MHz
9
863.250 MHz
10
863.375 MHz
11
863.500 MHz
12
863.625 MHz
13
863.750 MHz
14
863.875 MHz
15
864.000 MHz
16
(*) Without using bodypack.
Frequency
864.125 MHz
864.250 MHz
864.375 MHz
864.500 MHz
864.625 MHz
864.750 MHz
864.875 MHz
865.000 MHz
Publicidad
