Rear Panel - Black Box AC560A Manual De Instrucciones

HDMI TRANSMITTER

3.2 Rear Panel

Figure 3-2 shows the components on the transmitter's
rear panel. Table 3-2 describes the components'
functions.
Table 3-2. Transmitter rear-panel components and their functions.
Number
➀
➁
10
➀
Figure 3-2. Transmitter rear panel.
Component Name
Video output
DDC output
➂
➁
Description
Connect the transmitter's video output to the
receiver's video input using
CAT5/CAT5e/CAT6 cable.
Connect the transmitter's DDC output to to
the receiver's DDC input using
CAT5/CAT5e/CAT6 cable.
NOTE: For advanced users only, if the DDC
or HDCP data are required for the
source and the display, you can use
a single CAT5 cable to connect the
transmitter's and the receiver's video
ports.