Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
These models include one hot air tool with
LED display, specialized scrapers, nozzles and
carrying case.
HEAT PRO DELUXE II Specifications
Wattage
Temperature
Volts
Amps
Output
Weight
Cord Length
Settings
Operation of the HEAT PRO DELUXE II
These are general guidelines for using the
HEAT PRO DELUXE II hot air tool. Every project
is different, so use these instructions as a starting
point to determine the best heat setting and distance
to position the hot air tool from your work.
Before plugging the unit into an electrical outlet,
make sure the switch is in the Off position.
1. Plug in to a standard outlet.
2. To start, slide the switch to either the Lo or
High position. The motor-driven fan noise will
indicate the unit is running. The heating coil
will slowly turn red.
Note: Upon initial start up, smoke may appear
as the oils used in manufacturing burn off the
nozzle. This is normal and should stop within
one minute.
m Caution: If the blower motor in the hot air
tool does not turn on when the switch is set
to either Lo or High, turn the switch to Off
immediately. The heating element will burn
out if the blower is not cooling it.
3. For instructions on how to strip paint, go
to section HOT AIR TOOL OPERATIONAL
GUIDELINES.
4. Use the dial to increase (+) or decrease (-)
heat as needed. The LED lights will indicate
the temperature level from low to high.
5. To turn off, slide the switch to the Off position
and unplug. Allow the hot air tool to cool
completely before storing.
HEAT PRO DELUXE II
C820439B_MAN_Hot Air Tools.indd 10
HEAT PRO DELUXE II How to Use
44 to 1250 Watts
Low 140°F / High 1100°F
120 Volts
0.5 to 10.5 Amps
4250 BTU
1.75 lbs.
6 feet
High, Lo, Off
How To Attach Accessories
1. Set the unit upright on a level surface.
Make sure tip is cool.
2. Set the accessory nozzle on the top of the
open nozzle and push firmly into place.
3. To remove, set hot air tool with nozzle facing
up. Wait for it to cool.
4. Pull the accessory nozzle off the top using
a twisting motion and straight pull.
5. Use only accessories designed for this hot
air tool.
Deflector
All Purpose
Nozzle
Scraper
Window Protector
Scraper
Nozzle
Handle
HEAT PRO DELUXE II
Concentrator
Hook
Nozzle
Nozzle
Combination
Scraper
Triangle
Scraper
Heart
Scraper
ENGLISH 10
6/21/10 8:57 AM
Publicidad
Capítulos
Tabla de contenido
