Canceling A Baking Timer Countdown; Tips For Great Results; Recipe Tips - KitchenAid KWB110 Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING THE WAFFLE BAKER
Canceling a baking timer_ countdown
To cancel a timer countdown: Press the
1
RESET button. The baking timer display
will revert to the previous time set.
NOTE: If a timer countdown is not started within 2 hours, the baking unit will automatically
shut off.

TIPS FOR GREAT RESULTS

Recipe tips

• Do not over-mix the batter. A few lumps
are fine. Smooth batters produce tough,
heavy waffles.
• If refrigerated in a tightly sealed
container, most batters will remain
fresh for one or two days. Stored
batter will usually thicken, so you
may have to add a little water or
milk and re-mix the batter before
using. Cold batter may require
additional baking time to reach
desired brownness.
• Waffles made from low-fat recipes can
be difficult to remove. If your waffles
tend to stick to the waffle plates, add
a little more butter or oil to the recipe.
Do not coat the waffle plates with
spray-on oils or shortenings, they will
produce a gummy build-up that will be
difficult to remove.
To change the baking time and continue
2
baking, use the timer adjustment dial
to change the baking time, then press
the START button to begin a new timer
countdown.
• Recipes that include butter, oil, or
eggs will produce crispier, more
easily browned waffles than recipes
without those ingredients.
• For exceptionally light waffles, try this:
when the recipe calls for eggs, separate
the eggs and blend the yolk into the batter.
In a separate bowl, beat the whites until
fluffy, but not stiff, and carefully fold the
whites into the batter just before baking.
• For a hearty, full-grain flavor, try using
whole grain flour in place of white flour.
• Buttermilk powder is a good substitute
for fresh buttermilk in waffle recipes and
is easy to keep on hand. Use powder
according to package directions.
11

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido