Assembly Steps - Primus THRÓNOS200S Guía De Ensamblaje

K
M8x20mm allen head screw (16)
M
ST5x8mm screw (2) with caps

2. Assembly steps

Step Description
1 Start by attaching the five wheels into
chair base. Simply press the stud
firmly into the hole on the bottom of
the base.
L
ST5x10mm screw (2)
with caps
N
Allen wrench/phillip
screwdriver combination tool
Image
Step Description
2
Mount the gas lift and its cover into the top
of the chair base by placing the larger end
into the hole in the center.
Proceed to attach the mechanical base
3
to the seat assembly using four of the
supplied M8x20mm screws.
Note: Make sure to follow the arrow
direction for the frontal positioning
of the base.
Next, use eight M8x20mm screws to
4
attach the right (R) and left (L)
armrests to the seat assembly, as
illustrated in the figure on the right.
5 Attach the back rest to the seat cushion
using four M8x20mm screws so as to
fasten both sides of the chair.
Tighten the screws to firmly secure the
back rest.
Image
J
K
FRONT
D
BACK
K
K
K