marklin digital 60883 Manual Del Usario página 5

After that enter the assigned device (here 17).
If everything has been entered correctly, confirm it with the
green check mark. Store in memory along the way with the
blue arrow on the display now appearing in the image. After
that edit or process other routes or confirm with the green
check mark and end the process.
Addresses the button (Example)
(Input)
12 11
Button 25 =125
Button 26 = 126
Taster
Button 9 = 109
10
9
Button1 = 101
1 (Output)
Button 2 = 102
2 (Output)
Address Table for the Buttons
Please note, the diode must be installed in the blocking direction
at the output.
Example Button 1: 9 input connected to 1 output is replaced
by the address. 101.
(Input)
9
Input
9 10
Output
1 101 109 117 125 133 141 149 157
2 102 110 118 126 134 142 150 158
3 103 111 119 127 135 143 151 159
4 104 112 120 128 136 144 152 160
5 105 113 121 129 137 145 153 161
6 106 114 122 130 138 146 154 162
7 107 115 123 131 139 147 155 163
8 108 116 124 132 140 148 156 164
1 (Output)
11 12 13 14 15 16
5