Specification; General Safety - GMC DB250SMS Manual De Instrucciones

Specifications
Rating:
No load speed:
Supplied blade size:
Blade size range:
Blade thickness range:
Mitre angles:
GB
Bevel angles:
Straight cut at 0° x 0°:
Mitre cut at 45° (L&R) x 0°:
Mitre cut at 52° (L&R) x 0°:
Bevel cut at 0° x 45°(R):
Bevel cut at 0° x 45°(L):
Compound mitre cut
45° (R) x 45° (R):
52° (R) x 45° (R):
45° (L) x 45° (L):
52° (L) x 45° (L):
Electrical insulation:
Laser Class:
Laser Wavelength:
Laser Output power:
Sound Pressure:
Sound Power:
Uncertainty:
Typical Weighted Vibration:
Uncertainty:
Power Cable:
Weight:
Dimensions (mm):
As part of our ongoing product development, specifications of GMC
products may alter without notice.
The sound intensity level for the operator may exceed 85dB(A) and sound
protection measures are necessary.
230–240V~ 50Hz 1800W
5000 min
-1
250x30mmx24T
250-255mm
2.8-3.2mm
0° to 52° left & right
0° to 45° left
280 x 80mm
196 x 80mm
170 x 80mm
280 x 27mm
280 x 52mm
196mm x 27mm
170mm x 27mm
196mm x 52mm
170mm x 52mm
Double insulated
II
400-700nm
≤1mW
98dB(A)
112dB(A)
3dB(A)
7.14m/s²
1.5m/s²
3m
25.7Kg
945 x 575 x 500
Sound and vibration levels in the specification are determined according to
EN 61029. The figures given can be used to compare similar tools tested
to this standard. These figures may be used to assess exposure to noise
and vibration levels.
The figures represent normal use for the tool in normal working conditions.
A poorly maintained, incorrectly assembled or misused tool may produce
increased levels of noise and vibration. The total working period must
factor in periods where the tool is idle or switched off. Allow frequent rest
breaks when operating this tool.
It is in the interest of users to maximise their safety using the correct safety
equipment such as ear defenders that protect against loud or repetitive
noise, and anti-vibration gloves that minimise vibration. Do not operate the
tool with hands below a normal comfortable temperature as vibration will
have a greater effect.
www.osha.europa.eu provides information on sound and vibration levels
in the workplace that may be useful to domestic users who use tools for
long periods of time.
GENERAL SAFETY INSTRUCTIONS
WARNING. Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or serious
injury.
WARNING: This appliance is not intended for use by persons (including
children) with reduced, physical or mental capabilities or lack of experience or
knowledge unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children must be
supervised to ensure that they do not play with the appliance.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1. WORK AREA SAFETY
a. Keep work area clean and well lit. Cluttered and dark areas invite
accidents.
b. Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2. ELECTRICAL SAFETY
a. Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adaptor plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded su rfaces such as
pipes, radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
6